List of Publications

Journals

[1]      F. Amato, G. Ambrosino, M. Mattei, L. Verde, “Design and robustness analysis of gain-scheduled control system for parabolic flight,” AIAA Journal of Guidance, Control, and Dynamics, vol.19, pp.430-437, March 1996.

[2]      F. Amato. M. Corless, M. Mattei, R. Setola, “A multivariable stability margin in presence of time-varying, bounded rate gains,” International Journal of Robust and Nonlinear Control, vol.7, No.2, pp.127-144, Feb. 1997.

[3]      F. Amato, M. Mattei, A. Pironti, “A note on quadratic stability of uncertain linear discrete-time systems,” IEEE Transactions on Automatic Control, vol.43, No.2, pp.227-229, Feb. 1998.

[4]      F. Amato, M. Mattei, A. Pironti, “A Robust Stability Problem for Discrete-Time Systems Subject to an Uncertain Parameter,” Automatica, vol.34 No.4, pp.521-523, 1998.

[5]      F. Amato, M. Mattei, A. Pironti, “Solution of the state feedback singular H¥ control problem for linear time-varying systems,” Automatica, vol.36, pp.1469-1479, 2000.

[6]      F. Amato, M. Mattei, S. Scala, L. Verde “Robust Flight Control Design for the HIRM via Linear Quadratic Methods,” Aerospace Science and Technology vol.4, pp.423-438, 2000.

[7]      M. Mattei, “Sufficient conditions for the synthesis of H¥ fixed order controllers,” International Journal of Robust and Nonlinear Control, 10(15), 1237-1248, 2000.

[8]      G. Ambrosino, G.Celentano, M.Mattei, “A Control Design Oriented Mathematical Model for the Scirocco Plasma Wind Tunnel,” Mathematical and Computer Modelling of Dynamical Systems, 7(1), 109-127, 2001.

[9]      M. Mattei, “Robust Regulation of the Air Distribution into an Arc Heater,” Journal of Process Control, pp.285-297, vol.11, Issue 3, 2001.

[10]  F. Amato, M. Mattei, “Robust control of a plasma wind tunnel,” European Journal of Control, Vol.7, No.5, pp.494-510, 2001. Sullo stesso numero della rivista è anche pubblicato il lavoro di W.H.Chen, F. Amato, M. Mattei, “Discussion on Robust control of a plasma wind tunnel”.

[11]  M. Mattei, “ An LMI Approach to the Robust Temperature Trajectory Following for Space Vehicle Testing”, Automatica 37:12, ISSN: 0005-1098, 1979 – 1987, 2001.

[12]  M. Mattei, “Robust Multivariable PID Control for LPV Systems Depending on Fast-Varying Parameters,” Automatica, ISSN: 0005-1098 ,37:12, 1997 – 2003, 2001.

[13]  M. Mattei, F. Ricciardelli, “A Design Oriented Mathematical Model for the Control of Wind Excited Structures,” ASCE Journal of Mechanics, Sept. 2002.

[14]  F. Amato, M. Mattei, A. Pironti, “Guaranteeing cost strategies for linear quadratic differential games under uncertain dynamics,” Automatica Vol. 38 ,507-515, 2002.

[15]  M. Mattei, D. Pizzimenti, F. Ricciardelli, “Passive vs. Active Mass Damper Control of Wind Excited Tall Buildings”, Engineering Structures, ISSN: 0141-0296 ,Vol. 25(9), 1199-1209, 2003.

[16]  R.Albanese, G.Calabrò, M.Mattei, F.Villone, “Plasma Response Models for Current, Shape and Position Control in Jet,” ISSN: 0920-3796, Vol. 66-68, 715-718, Fusion Engineering and Design, Sept. 2003.

[17]  F.Crisanti, R.Albanese, G. Ambrosino, M.Ariola, J.Lister, M.Mattei, A.Pironti, F.Sartori, F.Villone, “Upgrade of the present JET Shape and Vertical Stability Controller,” Fusion Engineering and Design., ISSN: 0920-3796 ,Vol. 66-68, 803-807, Sept. 2003.

[18]  J. Pamelà, E.R. Solano, and EFDA-JET controbutors (M.Mattei is among these), Overview of JET results, Nuclear Fusion, 43, pp. 1540-1554, 2003.

[19]  M.Mattei, “Reply to comments on - sufficient conditions for the synthesis of H¥ fixed order controllers,” International Journal of Robust and Nonlinear Control, 14(1), 83-86, 2004.

[20]  M. Mattei, “An LPV approach to the robust control of a class of quasi-linear propagation processes”, Journal of Process Control, Vol 14, Issue 6, pp.651-660, Sept. 2004.

[21]  R. Albanese, M. Mattei, F. Villone, “Prediction of the Growth Rates of VDEs in JET”, Nuclear Fusion. Sept. 2004

[22]  M.Mattei, G.Paviglianiti, V.Scordamaglia, "Nonlinear observers with H-infinity performance for sensor Fault Detection and Isolation: a Linear Matrix Inequality design procedure", Control Engineering Practice, Vol 13/10 pp 1271-1281, 2005.

[23]  F.Amato, M. Mattei, A. Pironti, “Gain Scheduled control for discrete-time systems depending on bounded rate parameters”, International Journal of Robust and Nonlinear Control., Vol 15, N. 11, pp.473-494, 2005.

[24]  G. Ambrosino, R. Albanese, M. Ariola, A. Cenedese, F. Crisanti, G. De Tommasi, M. Mattei, F. Piccolo, A. Pironti, F. Sartori, “XSC plasma control: Tool development for the session leader,” Fusion Engineering and Design, Volume 74, Issues 1-4, November 2005, Pages 521-525.

[25]  A. Portone, R. Albanese, R. Fresa, M. Mattei, G. Rubinacci and F. Villone, “Vertical stability of ITER plasmas with 3D passive structures and a double-loop control system,” Fusion Engineering and Design, Volume 74, Issues 1-4, November 2005, Pages 537-542

[26]  R. Albanese, G. Ambrosino, M. Ariola, A. Cenedese, F. Crisanti, G. De Tommasi, M. Mattei, F. Piccolo, A. Pironti, F. Sartori, “Design, implementation and test of the XSC extreme shape controller in JET,” Fusion Engineering and Design, Volume 74, Issues 1-4, November 2005, Pages 627-632.

[27]  A. Cenedese, R. Albanese, G. Artaserse, M. Mattei, F. Sartori and JET-EFDA Contributors, “Reconstruction capability of JET magnetic sensors,” Fusion Engineering and Design, Volume 74, Issues 1-4, November 2005, Pages 825-830

[28]  F. Amato, C. Cosentino, M.Mattei, G.Paviglianiti, “A Direct/Functional Redundancy Scheme for Fault Detection and Isolation on an Aircraft,” Aerospace Science and Technology, Volume 10, Issue 4, May 2006, Pages 338-345.

[29]  R.Albanese, G. Artaserse, M.Mattei, O. Tudisco, “Plasma Reconstruction in Tokamaks with Linearized Approaches”, Accepted for publication on the International Journal of Applied Electomagnetics and Mechanics, 2006.

[30]  M.Mattei, V.Scordamaglia, "A Full Envelope Small Commercial Aircraft Flight Control Design using Multivariable Proportional-Integral Control", Accepted for publication on the IEEE Transactions on Control Systems Technology, 2006.

Book Chapters

[31]  F. Amato, M. Mattei, S. Scala, L.Verde, “HIRM Design via LQ Methods,” in Robust Flight Control, a Design Challenge, Lecture Notes in Control and Information Science, J.F.Magni, S.Bennani e J.Terlouw eds., Springer-Verlag, pp.444-463, Feb. 1997.

[32]  F. Amato, M. Mattei, S. Scala, “Linear Quadratic Optimal Control,” in Robust Flight Control, a Design Challenge, Lecture Notes in Control and Information Science, J.F.Magni, S.Bennani e J.Terlouw eds., Springer-Verlag, pp.43-51, Feb. 1997.

Conferences

[33]  S. Borrelli, M. Mattei, A. Schettino, “A simplified approach to the dynamic simulation of the aerothermodynamics in the Scirocco PWT,” Proceedings of the Second European Symposium on Aerothermodynamics for Space Vehicles, Nov. 1994, Nordwijk (The Netherlands).

[34]  F. Amato, M. Corless, M. Mattei, R. Setola, “Robust stability of linear systems depending on uncertain, slowly-varying parameters,” Proceedings of the 32nd Allerton Conference, Oct. 1995, Monticello (IL), USA.

[35]  F. Amato, M. Mattei, A. Pironti, “Finite horizon robust H¥  control for linear time-varying systems depending on norm bounded uncertainties,” Proceedings of the 4th Mediterranean Symposium in Control and Automation, June 1996, Krete (Greece).

[36]  F. Amato, M. Mattei, A. Pironti, “Robust control of a power supply system for an arc heater,” Proceedings of the 5th Conference on Control Application CCA-96, Sept. 1996, Detroit, USA.

[37]  F. Amato, M. Mattei, A. Pironti, “Robust H¥ control for time-varying systems depending on multi-block uncertainties,” Proceedings of the 35th IEEE Conference on Decision and Control CDC-96, Dec. 1996, Kobe (Japan).

[38]  F. Amato, M. Mattei, A. Pironti, “Guaranteeing cost strategies for linear quadratic differential games under uncertain dynamics,” Proceedings of the 4th European Control Conference ECC-97, July 1997, Bruxelles.

[39]  F. Amato, M. Mattei, A. Pironti, “Solution of the state feedback singular H¥ control problem for linear time-varying systems,” Proceedings of the 34th Allerton Conference, Oct. 1997, Monticello, USA.

[40]  G. Ambrosino, G. Celentano, M. Mattei, L. Verde, “Modelling and control of a plasma wind tunnel,” Proceedings of the AIAA 8th International Space Planes and Hypersonic Systems and Technologies Conference Norfolk, VA, USA, April 27-30, 1998.

[41]  F. Amato, M. Mattei, A. Pironti, “Sufficient Conditions for Robust Stability of Discrete-Time Systems Subject to Time-Varying Parameters,” Proceedings of the IFAC Workshop on System Structure and Control, Nantes, France, July 8-10, 1998.

[42]  F. Amato, M.Mattei, A. Pironti, “Robust Stability of Linear, Discrete-Time Systems subject to Time-Varying, Bounded Rate Parameters,” Proceedings of the Mathematical Theory of Networks and Systems Conference, Padova, Italy, July, 1998.

[43]  F. Amato, M. Mattei, “Robust control of a plasma wind tunnel,” Proceedings of the 7th Conference on Control Applications, Trieste, Italy, Sept, 1998.

[44]  F. Amato, M. Mattei, S. Scala, L.Verde, “Robust Flight Control Design for the HIRM via Linear Quadratic Methods,” Proceedings of the AIAA Conference on Guidance, Navigation and Control Conference, Boston (MA), USA, Aug., 1998.

[45]  F. Amato, M. Mattei, A. Pironti, “Robust Strategies for Nash Linear Quadratic Games Under Uncertain Dynamics,” Proceedings of the IEEE 37th  Conference on Decision and Control, Tampa (FL), USA, Dec.1998

[46]  M. Mattei, “A Robust Temperature Trajectory Following Control System for Space Vehicle Testing,” Proceedings of the IEEE 37th  Conference on Decision and Control, Tampa (FL), USA, Dec.1998.

[47]  F. Amato, M. Mattei, A. Pironti “Constant quadratic forms for a discrete-time robust stability problem,” Proceedings of the IFAC World Congress, Bejing (China), June 1999.

[48]  M. Mattei, “A Robust Multiple PI Controller for the Air Distribution into an Arc Heater”, Proceedings of the ‘99 European Control Conference, Karlsruhe, Germany, Aug. 1999.

[49]  F. Amato, M. Mattei, A. Pironti, “A New Condition for Asymptotic Stability of Uncertain Discrete-Time Systems: It Is Less Conservative Than the Quadratic Stability Condition,” Proceedings of the 38th Conference on Decision and Control, Dec., 1999.

[50]  G.Ambrosino, M.Mattei, “A Software Environment for the Simulation and the Control Law Design of the Scirocco Plasma Wind Tunnel,” Proceedings of the 3rd MATHMOD Vienna Conference, IMACS, Feb. 2-4, 2000.

[51]  F. Amato, M. Mattei, A. Pironti, “Gain Scheduling Control for Discrete Time Systems Depending on Slowly Varying Parameters,” Proceedings of the 3rd IFAC Symposium on Robust Control Design ROCOND 2000, Prague, June 2000.

[52]  M.Mattei, “When Quadratic Stability Meets PID Control,” Proceedings of the 3rd IFAC Symposium on Robust Control Design ROCOND 2000, Prague, June 2000.

[53]  F. Amato, M. Mattei, A. Pironti, “Robust Strategies for Trajectory Tracking Nash Linear Quadratic Games Under Uncertain Dynamics,” Proceedings of the 3rd IFAC Symposium on Robust Control Design ROCOND 2000, Prague, June 2000.

[54]  M. Mattei, “A note on the solution of a class of BMIs for H¥ problems,” Proceedings of the IEEE 39th Conf. Dec. Contr., Sidney 2000

[55]  M.Mattei, F. Ricciardelli, “A Design Oriented Mathematical Model for the Control of Wind Excited Structures,” European Control Conference, Porto 2001.

[56]  M.Mattei, “A Robust Control Scheme for a Class of Quasi Linear Propagation Processes”, European Control Conference, Porto, 2001.

[57]  M.Mattei, F.Ricciardelli, D. Pizzimenti, “Effectiveness of passive and active mass dampers for the control of the wind excited motion of tall buildings”, 3rd World Conference on Structural Control, April, 2002.

[58]  F.Amato, M.Mattei, “Design of full order Unknown Input Observers with H¥ performance,” IEEE Conference on Control Application, Glasgow (UK), September 2002.

[59]  F.Amato, R.Iervolino, M.Mattei, G.Paviglianiti, “A Nonlinear UIO Scheme for the FDI on a small commercial Aircraft,” IEEE Conference on Control Application, Glasgow (UK), September 2002.

[60]  R.Albanese, G.Calabrò, M.Mattei, F.Villone, “Plasma Response Models for Current, Shape and Position Control in Jet,” 22nd Symposium on Fusion Technology, Sept. 2002, Helsinki, Finland.

[61]  F.Crisanti, R.Albanese, G. Ambrosino, M.Ariola, J.Lister, M.Mattei, A.Pironti, F.Sartori, F.Villone, “Upgrade of the present JET Shape and Vertical Stability Controller,” 22nd Symposium on Fusion Technology, Sept. 2002, Helsinki, Finland.

[62]  R.Albanese, M.Mattei, G. Calabrò, F.Villone, “Unified Treatment of Forward and Inverse Problems in the Numerical Simulation of Tokamak Plasmas”, International Symposium on Applied Electromagnetics and Mechanics ISEM 2003, Versailles, France

[63]  D. Pizzimenti, M.Mattei, P. Spanò, F.Ricciardelli, “Mass Damper control of wind excited tall buildings: LQR vs. H¥ techniques”, International Conference on Wind Engineering, Lubbock 2003.

[64]  F.Amato, C.Cosentino, M.Mattei, G.Paviglianiti, “An Hybrid Direct/Functional Redundancy Scheme for the FDI on a small Commercial Aircraft,” SAFEPROCESS'03, IFAC Symposium, Washington D.C., 2003.

[65]  M.Mattei, V.Scordamaglia, "Flight control design using multivariable PI control with H2-Hinfinity performance", IEEE 12th Mediterranean Conference on Control and Automation, Kusadasi,Turkey, June 2004

[66]  M.Mattei, G.Paviglianiti, V. Scordamaglia, "Nonlinear H-infinity Identity observers for sensor FDI: an application example," IEEE Conference on Mechatronics, Istanbul, Turkey, June 2004.

[67]  Cenedese A., R. Albanese, G.Artaserse, M.Mattei , F. Sartori, "Reconstruction Capability of JET Magnetic Sensors," 23rd Symposium on Fusion Technology, Venice (I), 2004

[68]  R. Albanese, G. Ambrosino, M. Ariola, A. Cenedese, F. Crisanti, G. De Tommasi, M. Mattei, F. Piccolo, A. Pironti, F. Sartori, F. Villone, and JET-EFDA Contributors, "Design, Implementation and Test of the XSC Extreme Shape Controller in JET," 23rd Symposium on Fusion Technology, Venice (I), 2004

[69]  G. Ambrosino, R. Albanese, M. Ariola, A. Cenedese, F. Crisanti, G. De Tommasi, M. Mattei, F. Piccolo, A. Pironti, F. Sartori, F. Villone, and JET-EFDA Contributors, "XSC Plasma Control: Tool Development for the Session Leader," 23rd Symposium on Fusion Technology, Venice (I), 2004

[70]  R. Albanese, R. Fresa, M. Mattei, G. Rubinacci, F. Villone, "Vertical Stability of ITER Plasma with 3D Passive Structures and a Double-Loop Control System," 23rd Symposium on Fusion Technology, Venice (I), 2004.

[71]  M. Mattei; G. Paviglianiti; Managing Sensor Hardware Redundancy on a Small Commercial Aircraft with H-infinity FDI Observers, IFAC World Conference, Praha, 2005

[72]  M. Mattei; G. Paviglianiti; Actuators FDI on a Small Commercial Aircraft Using Online Approximators; IFAC World Conference, Praha, 2005

[73]  G. Paviglianiti, F. Caccavale, M. Mattei, F. Pierri, Sensor Fault Detection and Isolation for Robot Manipulators, IEEE Mediterranean Conference on Control and Application, MED05.

[74]  R. Albanese, M. Mattei, A. Portone, G. Ambrosino, G.Artaserse, F.Crisanti, G. DeTommasi, R. Fresa, F. Sartori, F. Villone, "Magnetic Configuration Control of ITER Plasmas," 24th Symposium on Fusion Technology, Warsaw (P), 2006

[75]  R.Albanese, G. Artaserse, M.Mattei, O. Tudisco, “Plasma Reconstruction in Tokamaks with Linearized Approaches”, 9th Workshop on Optimization and Inverse Problems in Electromagnetism, September 13-15, Sorrento, Italy, 2006.

[76]  M. Mattei, R Albanese, G. Ambrosino, A. Portone, “Open Loop Control Strategies for Plasma Scenarios: Linear and Nonlinear Techniques for Configuration Transitions,” 45th IEEE Conference on Decision and Control, San Diego, Dec. 2006

[77]  M. Ariola, G. De Tommasi, M. Mattei, A. Pironti, “Graphic tools for plasma shape control design and validation,” 45th IEEE Conference on Decision and Control, San Diego, Dec. 2006

[78]  Gaetano Paviglianiti, Massimiliano Mattei, Sensor Fault Detection with Hinf Nonlinear Observers, Networked Control Systems: Tolerant to Faults, Cosenza, Italy, 2006

Italian Journals and Conferences

[79]  G. Ambrosino, G. Celentano, M. Mattei, L. Verde, “Simulazione dinamica e controllo della galleria al plasma Scirocco,” NT Tecnica e Tecnologia, Notiziario Tecnico AMMA, ISNN 0392-4521, vol.51, n.1, pp.3-11, Feb. 1996.

[80]  G. Ambrosino, E. Filippone, M. Mattei, L. Verde, “Sistema di controllo per voli parabolici: un approccio tipo receding horizon,” Atti del XXII Congresso A.I.D.A.A., July 1993, Como.

[81]  G. Ambrosino, G. Celentano, M. Mattei, “Simulazione e controllo di una moderna galleria al plasma,” Atti del Convegno Anipla Automazione '95, Nov. 1995, Bari.

[82]  F. Amato, M. Mattei, S.Scala “Progetto di un Sistema di Controllo di Volo Robusto per il Velivolo HIRM: un approccio di tipo Lineare Quadratico,” Atti del XIV Convegno AIDAA, Oct. 1997, Napoli.

[83]  G. Ambrosino, G. Celentano, U. Ciniglio, M. Mattei, L.Verde “Progetto del Sistema di Controllo per la Galleria Scirocco,” Atti del XIV Convegno AIDAA, Oct. 1997, Napoli.

[84]  F.Ricciardelli, D. Pizzimenti, M.Mattei, “Controllo mediante masse inerziali di strutture soggette all'azione del Vento applicazione ad un edificio benchmark,” 7° Convegno Nazionale di Ingegneria del Vento IN-VENTO 2002, Milano, 2002.

[85]  V. Coccorese, R. Albanese, G. Artaserse, F. Basso, G:Calabrò, G. Chitarin, D. Marcuzzi, M. Mattei, S. Peruzzo, N. Pomaro, F. Villone, Enhancement of Magnetic Diagnostic for JET, Atti del Convegno ET2003, XIX Riunione annuale dei Ricercatori in Elettrotecnica, Perugia, 19-21 Giugno 2003.

[86]  R. Albanese, G. Artaserse, G. Calabrò, E. Coccorese, M. Mattei, G. Rubinacci, F. Sartori, F. Villone, Modeling and simulation of plasma and PF circuits control system in JET, Atti del Convegno ET2003, XIX Riunione annuale dei Ricercatori in Elettrotecnica, Perugia, 19-21 Giugno 2003.

[87]  R. Albanese, R. Fresa, M. Mattei, A. Portone, G. Rubinacci, F. Villone, Analisi di Stabilità verticale in ITER in presenza di strutture tridimensionali, Atti del Convegno ET2004, XX Riunione annuale dei Ricercatori in Elettrotecnica, Fisciano (SA), 16-19 Giugno 2004

[88]  R. Albanese, M. Mattei F. Villone,G . Ambrosino, M. Ariola,F. Crisanti, G. de Tommasi, Y.Q. Liu, A. Pironti, A. Portone, G. Rubinacci, F. Sartori, Modellistica e Controllo di Plasma in ITER, Atti del Convegno ET2006, XXII Riunione annuale dei Ricercatori in Elettrotecnica, Torino, 15-17 Giugno 2006

[89]  V. Coccorese, R. Albanese, G. Ambrosino, M. Ariola, G. Artaserse, G. De Tommasi, M. Mattei, F. Maviglia, F. Piccolo, A. Pironti, A. Quercia, G. Rubinacci, F. Villone, Modellistica, Diagnostica e Controllo del Plasma nel JET, Atti del Convegno ET2006, XXII Riunione annuale dei Ricercatori in Elettrotecnica, Torino, 15-17 Giugno 2006.

Main Reports

[90]  M. Mattei, “Voli parabolici per sperimentazioni in microgravità,” CIRA Technical Report, Prot. DILC-INT-TN-423, Feb. 1994.

[91]  G. Ambrosino, S.Borrelli, G.Celentano, M. Mattei, L.Verde, “The Scirocco Control system for the execution of dynamic tests: design, performance analysis and evaluation,” CIRA Technical Report, Prot. INT-95067, May 1995.

[92]  F. Amato, M. Mattei, “Kharitonov Theory,” in Robust Control Techniques Tutorial Document, Technical Report GARTEUR/TP-088-7, Apr 1997.

[93]  F. Amato, M. Mattei, S. Scala, “HIRM design challenge presentation document: the LQ methods and eigenstructure assignment approach,” GARTEUR/TP-088-26 Report, Apr. 1997.

[94]  M. Mattei, “Modellistica e Controllo di veicoli orbitanti nelle fasi di rendez-vous e docking”, Rapporto interno del Dipartimento di Informatica e Sistemistica dell’Università di Napoli, 1997.

[95]  G. Ambrosino, M. Mattei, “The Scirocco PWT Dynamic Simulator and the Test Control Algorithms”, Detailed Design Document, CREATE Technical Report, Feb. 1998.

[96]  R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at EFDA-CSU Garching,” Germany, 20-Jun-20-Jul, July 2001.

[97]  R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at JET Culham,” UK, January 2002.

[98]  R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at EFDA-CSU Garching,” Germany, 4-27 Feb, Feb. 2002.

[99]  R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at EFDA-CSU Garching,” Germany, Jun-Jul, July 2002.

[100]       R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at EFDA-CSU Garching,” Germany, Jan-Feb, Feb 2003.

[101]       R. Albanese, M.Mattei, “Report of the activity carried out during Mobility at EFDA-CSU Garching,” Germany, 30-Jun-19-Jul, July 2003.

[102]       R. Albanese, M.Mattei, F. Villone, “Improved CREATE Models for Plasma Shape Control in JET,” CREATE Technical Report, Nov. 2001

[103]       R. Albanese, G. Calabrò, M.Mattei, F. Villone, “Plasma Response Models for Current, Shape and Position Control in JET,” JET Enhancement Project Report, April. 2002

[104]       F.Amato, R.Iervolino, M.Mattei, “Redundancy Design and Uncertainty Modelling”, ADFCSII project GRD1-2000-25261, Document ADFCS-II/UN/T2.1/rep/002, Nov.2001.

[105]       F.Amato, M.Mattei, “Sensor Fault Detection and Isolation using model based techniques for the ADFCS-II Small Commercial Aircraft”, ADFCSII project GRD1-2000-25261, Document ADFCS-II/UN/T2.1/rep/003 June 2002.

[106]       M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.2, “Requisiti per il SE funzionali allo sviluppo del sistema FDIR,” 2003, M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.3, “Descrizione degli scenari per il progetto e la valutazione delle prestazioni degli algoritmi di FDIR,” 2003.

[107]       M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.2, “Analisi della modellistica del velivolo e produzione di modelli lineari e nonlineari semplificati,” M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.5, “Analisi di tecniche FDI basate sul modello,” 2003.

[108]       M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.6, “Analisi di tecniche FDI non basate o parzialmente basate sul modello,” M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.7, “ Analisi di una particolare tecnica FDIR,” 2004.

[109]       M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.8, “Integrazione delle tecniche di FDI analizzate e risultati complessivi,” 2005, M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.8, “Codifica e implementazione real-time sistema di FDIR (VA) ,” 2006. M.Mattei, Progetto GAFACS, Rapporto Tecnico WP14.9, “Supporto implementazione real-time sistema di FDIR (UNINA) ,” 2006.

[110]       R. Albanese, R. Fresa, M. Mattei, G. Rubinacci, F. Villone (CREATE), "VERTICAL STABILISATION OF ITER PLASMAS IN PRESENCE OF A 3D VESSEL STRUCTURE", Draft Final Report (Milestone M3) on Contract EFDA/03-1108, May 2004.

[111]       Villone F., Albanese R., Mattei M., 2D modelling of disrupting plasma, including current outside the last closed flux surface (halo current), Final Report, Notification JW4-N-ENEA-38, 2005

[112]       R. Albanese and M. Mattei, “Report of Mobility at EFDA-CSU Garching, Germany, 28 June - 16 July 2004”, July 2004.

[113]       R. Albanese, G. Artaserse, F. Crisanti, G. De Tommasi, M. Mattei, "Plasma modelling and control in JET", presented at the TF-S2 and REAL TIME CONTROL MEETING, Frascati, 7-11 June 2004

[114]       R. Albanese, G. Artaserse, F. Crisanti, G. De Tommasi, M. Mattei, "Identification of plasma pressure and current and derivation of linearized reconstruction models for control", presented at the TF-S2 and REAL TIME CONTROL MEETING, Frascati, 7-11 June 2004

[115]       R. Albanese, A. Cenedese, M. Mattei, F.Piccolo, F. Sartori, F. Villone, “DYNAMIC RESPONSE ON THE VS TIME SCALE”, internal report, Magnetic Diagnostics Enhancement, TASK T18: Magnetic Analysis Tools Development, JUNE 2004

[116]       R. Albanese, G. Artaserse, M. Mattei, “Plasma Current Moments and Boundary Reconstruction”, internal report, Magnetic Diagnostics Enhancement, TASK T18: Magnetic Analysis Tools Development, JUNE 2004

[117]       F. Villone, R. Albanese, M. Mattei, “2D modelling of disrupting plasma, including current outside the last closed flux surface (halo current)”, Final Report - Notification JW4-N-ENEA-38, Jan. 2005.

[118]       R. Albanese, G. De Tommasi, M.Mattei, M. Ariola, G. Ambrosino, A.Pironti, F.Villone, “XSC TOOLS VERSION 1.1: SHORT MANUAL FOR THE INSTALLER AND QUICK REFERENCE GUIDE”, CREATE Report, Nov. 2005

[119]       R. Albanese, M. Mattei, Report of Mobility at EFDA-CSU Garching, Germany – 21 February – 11 March 2005.

PhD Thesis

[120]       M. Mattei, “Modellistica e controllo di una galleria al plasma,” Tesi di Dottorato, Napoli, Feb. 1997.